Guide and thrust bearing oil coolersThe guide and thrust bearing oil coolers allow cooling of the oil used in the guide and thrust bearings of the turbine and generator; oil which heats up due to the friction of the various moving parts. Through years of hands-on experience and the development with its partners of unique custom made solutions, Thermofin has been able to establish itself as a market leader in the design and manufacture of bearing coolers. Whether the heat exchange needs to be forced or natural convection, through single or double tube arranged to fit you specific geometrical requirements, Thermofin holds profound understanding of the heat transfer mechanisms insuring adequate sizing and efficient cooling.  It will fit and it will cool. The Thermofin team can also refurbish your bearing oil cooler for easy maintenance by changing the configuration (number of sections) of your cooler. There are two families of bearing coolers : internal and external.

INTERNAL BEARING OIL COOLERS

Hydrocool exchangers usually have a circular shape for installation in bearing oil tanks. The bearing coolers ensure the cooling of the oil which circulates outside the tubes using river water which circulates inside the tubes. The thermal design of Hydrocool heat exchangers is generally based on free convection on the oil side, as oil velocities are often difficult to quantify accurately. Our guide and thrust bearing oil coolers can be designed with or without fins, depending on the space requirement. When using fins, Powerfin extruded aluminum fins are used which ensures a robust and durable design of your cooler. Internal bearing coolers can be designed in different configurations :

Bearing cooler 360 degrees configuration
Refroidisseur de paliers 360 degrées

CIRCULAR IN A 360° SINGLE PIECE

This configuration has the advantage of offering fewer connections and therefore less risk of leaks, but has the disadvantage of making the maintenance of the bearing cooler more complex, since the cover of the tank must absolutely be disassembled in order to access the cooler.

Guide and thrust bearing oil coolers 360 3D
Bearing coolers 360 degrees drafts

CIRCULAR IN TWO 180 ° SECTIONS

This configuration greatly facilitates the installation and removal of the bearing oil cooler, but requires more connections.

Guide and thrust bearing oil coolers 180 3D
Bearing coolers 180 degrees drafts
Bearing cooler 180 degrees configuration
Refroidisseur de paliers 180 degrées
Bearing cooler 120 degrees configuration
Refroidisseur de paliers 120 degrées

CIRCULAR IN THREE 120° SECTIONS

This configuration further reduces the weight and size of the cooler, but increases the number of fittings.

Guide and thrust bearing oil coolers 120 3D
Bearing coolers 120 degrees drafts

CIRCULAR IN FOUR 90° SECTIONS

This configuration makes it possible to reduce the size of the access hatches to the cooler on the tank and thus facilitates their maintenance.

Guide and thrust bearing oil coolers 90 3D
Bearing coolers 90 degrees drafts
Bearing cooler 90 degrees configuration
Refroidisseur de paliers 90 degrées
Bearing cooler straight configuration
Refroidisseur de paliers droit

IN STRAIGHT SECTION

Depending on the type of tank, the bearing coolers can be designed in straight section and slide laterally into the tanks.

Guide and thrust bearing oil coolers straight 3D
Bearing coolers straight drafts

DOUBLE TUBE DESIGN FOR LEAK DETECTION

For maximum safety, Thermofin is able to offer a design of its guide and thrust bearing oil coolers with a double tube configuration to avoid any mixing of water and oil in the event of a leak, thus eliminating the risk of cross contamination. This configuration consists in inserting a first tube into a second tube of larger diameter. In the case of leakage of the inner tube, in which the fluid circulates, grooves situated between the two tubes make it possible to convey the liquid to a detection chamber. There, it is quickly detected, either by a sensor or by a spill into a drip pan provided for this purpose. Projection of water onto surrounding equipment is avoided.

The choice of materials and the design of the bearing coolers are essential in order to avoid premature failure. Indeed, the water circulating inside these coolers comes directly from a river or lake and can have a relatively high corrosive potential and many sediments (erosion). The Thermofin team will help you choose the right material for your bearing oil cooler.

EXTERNAL BEARING OIL COOLERS

Two technologies are often used for the external cooling of guide or thrust bearing oils : shell and tube heat exchangers or gasketed plate and frame heat exchangers. For these two cooler technologies, the oil no longer circulates in natural convection as in the case of the HYDROCOOL bearing coolers, but in forced convection. The circulation of the oil is often ensured by the use of a pump. Since the bearing oil circulates in forced convection, the efficiency of the external bearing oil coolers is much higher than for internal bearing oil coolers and thus their footprint is considerably reduced. Due to the fact that these coolers are not immersed in the bearing tank, their maintenance is greatly facilitated.

Shell & Tubes heat exchanger

CALEOS SHELL & TUBE HEAT EXCHANGER

The oil flows on the shell side of the bearing cooler and the water flows inside the tubes. This exchanger technology has the advantage of performing even with a very low water quality with many carry-on sediments.

Gasketed plate and frame heat exchangers

ITEX GASKETED PLATE AND FRAME HEAT EXCHANGER

Water and oil circulate alternately in each channel of the plate and frame heat exchanger. ITEX-type external bearing oil coolers are extremely efficient and offer the smallest footprint. The gasketed plate and frame technology also allows for easy cleaning and provides a modular cooling capacity that can be increased by adding plates. On the other hand, this exchanger technology requires a more elaborate filtration system in order to avoid clogging the heat exchanger.

INDUSTRIES

HYDROCOOL Guide and thrust bearing oil coolers are a perfect solution in the following industries

Brochure of our guide and thrust bearing coolers

You are an agent interested in selling our products, or you are simply looking for additional information? Don’t hesitate to download our brochures. We can also provide, upon request, prints & other promotional material.

SEE ALL OUR BROCHURES

 
For all inquiries
Call us : +1 450-444-4405
WE ARE

EFFICIENCY-DRIVEN

HEAT EXCHANGER CREATORS